Saleculator works well on low spec boards. If you want to setup a low cost POS system, Saleculator on Raspberry Pi would be the best choice. This article will teach you how to install Saleculator POS software on Raspberry Pi.
Hardware Requirements #
- Raspberry Pi 3 or Pi 4
- 16GB SD Card
- DS3231 Real Time Clock with Battery
- 5V/3A Power Adapter
- Raspberry Pi Case
- Touchscreen or normal monitor
- HDMI to VGA Adapter, if your monitor doesn’t have HDMI
- Keyboard and Mouse
- Card reader
- Windows Laptop or PC
Software requirements #
Win32DiskImager: Software for writing Saleculator image to SD card. You can download it from the below link:
Putty: Software for remote accessing the Raspberry Pi. You can download it from the below link:
Have these softwares installed and ready on your windows system.
1. Copy Saleculator image to the SD Card
Using card reader plug the SD card into your windows computer. Now download Saleculator Image from below link
For Raspberry Pi 3 Model B:
For Raspberry Pi 3 Model B+ and Pi 4: https://www.saleculator.com/download/SaleculatorM5-2018-3BPlus-16GB.zip
After downloading the image file, unzip and copy it to the 16GB SD card using the Win32DiskImager.
Double click the Win32DiskImager to load it and you will get a window like the one shown below.
Click on the folder icon and load the image file. Once you plug in the 16GB SD card to your system it will show under the Device dropdown. Click “Write” button and it will start the copy process. This will take a while to complete. Once done copying click the “Exit” button. Remove the card reader and the SD card from it.
2. Connect the Raspberry Pi
Connect the monitor with HDMI port, Keyboard and Mouse with the USB ports, Ethernet cable with Ethernet port and the power line to the power port. Insert the 16GB SD card into the Micro SD card slot.
Turn on the Raspberry Pi device. You will see Saleculator boot loader screen and then the activation screen.
You can get a 30 days trial key from below URL to activate Saleculator:
3. Update Date and Time
You can update the date and time directly on the Raspberry PI or remotely using Putty. To access remotely using Putty, please refer the below document:
To access Saleculator command root directly from the machine press Ctrl + Alt + F1 on the keyboard connected to the Raspberry Pi. Once inside the command shell, login using the user name “root” and password “saleculator”
To update the date and time, type below command and hit enter key
Choose option 4 and enter
Choose option 12 to change time zone
Choose the geographical area
Choose your location
Hit enter to choose the location and hit the tab key to select “Finish” and hit enter again.
Type “clear” and hit enter.
Type “Date” and hit enter and cross check if the time matches with your zone and is correct.
4. Installing “Latest Saleculator.jar” file From the root
Delete old jar file:
Type: rm -r /opt/Saleculator/lib/
Download latest jar file:
Type: wget www.saleculator.com/download/Saleculator4u5.zip
Unzip and delete the zip file leaving the new .jar file and lib:
Type: unzip Saleculator4u5.zip
Activating Saleculator #
For activating Saleculator, please refer below document:
Updating Saleculator to the latest version #
For updating Saleculator to the latest version, please refer below document: